To Clear The Internal Memory Safely; Factory Settings - Rigol MSO5000-E Series User Manual

Chapter 18 Store and Load

To Clear the Internal Memory Safely

1) Press Storage → Disk, rotate the multifunction knob
memory "Local Disk(C)".
2) Press SecurityClear, and then a prompt message for confirming security clear
is displayed.
3) Press OK to clear all the files stored in the internal memory.

Factory Settings

Press Default on the front panel, then a prompt message "Restore default?" is
displayed. Press OK or tap OK to restore the oscilloscope to the factory default
settings, as shown in the table below.
Table 18-1 Factory Settings
Parameter
Horizontal
Vertical
Acquire
Trigger
Display
Function/AWG (Gen)
Cursor
Storage
Utility
Math
Logic Analyzer (LA)
Protocol Decoding (Decode)
Ref
Horizontal
Horizontal
Timebase
Horizontal Position
Delayed Sweep
Timebase Mode
Fine
Horizontal
Expansion
Vertical
Vertical Scale
Vertical Offset
CH1
CH2
MSO5000-E User Guide
Factory Settings
1 μs
0 s
Off
YT
Off
Center
100 mV
0 V
On
Off
RIGOL
to select the internal
18-13