Rigol MSO5000-E Series User Manual page 221

Chapter 11 Protocol Decoding
EOF Error
⚫
This error is generated when the EOF condition is not met. For example, if
the Stop Bit is set to 1.5, but the actual stop bits is less than 1.5 bits, then
the red error report information
value of the horizontal timebase) is displayed in the following figure.
Parity Error and EOF Error
⚫
When both the parity error and the EOF error are detected, the error report
information (its display form is related to the value of the horizontal
timebase), as shown in the following figure, will be displayed.
MSO5000-E User Guide
(its display form is related to the
RIGOL
11-13