Table of Contents
Advertisement
Step 5: Verify Operation of the Module
To Update the Firmware
If a firmware update is available, perform the following procedure to update the
firmware of the M9614A/M9615A modules.
1. Click Start menu > Keysight M960x Source Measure Unit > M960x SFP. The
2. In the list on the window, highlight the M9614A/M9615A modules to connect,
3. Confirm that the Access indicator on the M9614A/M9615A front panel turns
4. Select Firmware Update... from the Utilities menu. The Firmware Update
5. Select the latest version of the firmware, if it is available.
6. Click Update at the bottom of the Firmware Update dialog box to start the
7. Close the M960x SFP.
8. Restart your system; Power down the controller, then the chassis, and power
16
Connect to Instrument dialog box will open.
and click Connect to launch the Keysight M960x PXIe Source Measure Unit
Soft Front Panel (the M960x SFP).
green. Refer to
Figure 1-1
dialog box will open.
If the select menu displays "No change", there are no firmware updates.
firmware update.
When the firmware is updated successfully, the message appears in the
Firmware Update dialog box.
up the chassis, then the controller.
and
Table 1-3
for LED status.
Keysight M9614A/M9615A Startup Guide, Edition 1
Advertisement
Table of Contents
