Keysight M9614A Startup Manual page 2

Pxie 5-channel precision source/measure unit (smu)
Hide thumbs Also See for M9614A:
Table of Contents

Advertisement

Notices
Copyright Notice
© Keysight Technologies 2020
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation into
a foreign language) without prior agreement
and written consent from Keysight Technolo-
gies as governed by United States and inter-
national copyright laws.
Manual Part Number
M9615-90000
Edition
Edition 1, May 2020
Published by:
Keysight Technologies Japan K.K.
9-1, Takakura-cho, Hachioji-shi, Tokyo
192-0033 Japan
Regulatory Compliance
This product has been designed and tested in
accordance with accepted industry standards,
and has been supplied in a safe condition. To
review the Declaration of Conformity, go to
www.keysight.com/go/conformity.
Warranty
THE MATERIAL CONTAINED IN THIS DOCU-
MENT IS PROVIDED "AS IS," AND IS SUBJECT
TO BEING CHANGED, WITHOUT NOTICE, IN
FUTURE EDITIONS. FURTHER, TO THE MAXI-
MUM EXTENT PERMITTED BY APPLICABLE
LAW, KEYSIGHT DISCLAIMS ALL WARRAN-
TIES, EITHER EXPRESS OR IMPLIED, WITH
REGARD TO THIS MANUAL AND ANY INFOR-
MATION CONTAINED HEREIN, INCLUDING
BUT NOT LIMITED TO THE IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE.
KEYSIGHT SHALL NOT BE LIABLE FOR
ERRORS OR FOR INCIDENTAL OR CONSE-
QUENTIAL DAMAGES IN CONNECTION WITH
THE FURNISHING, USE, OR PERFORMANCE
OF THIS DOCUMENT OR OF ANY INFORMA-
TION CONTAINED HEREIN. SHOULD KEY-
SIGHT AND THE USER HAVE A SEPARATE
WRITTEN AGREEMENT WITH WARRANTY
TERMS COVERING THE MATERIAL IN THIS
DOCUMENT THAT CONFLICT WITH THESE
TERMS, THE WARRANTY TERMS IN THE SEP-
ARATE AGREEMENT SHALL CONTROL.
KEYSIGHT TECHNOLOGIES DOES NOT WAR-
RANT THIRD-PARTY SYSTEM LEVEL (COMBI-
NATION OF CHASSIS, CONTROLLERS,
MODULES, ETC.) PERFORMANCE, SAFETY,
OR REGULATORY COMPLIANCE, UNLESS
SPECIFICALLY STATED.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accordance
with the terms of such license.
U.S. Government Rights
The Software is "commercial computer soft-
ware," as defined by Federal Acquisition Reg-
ulation ("FAR") 2.101. Pursuant to FAR 12.212
and 27.405-3 and Department of Defense FAR
Supplement ("DFARS") 227.7202, the U.S.
government acquires commercial computer
software under the same terms by which the
software is customarily provided to the public.
Accordingly, Keysight provides the Software
to U.S. government customers under its stan-
dard commercial license, which is embodied
in its End User License Agreement (EULA), a
copy of which can be found at
www.keysight.com/find/sweula. The license
set forth in the EULA represents the exclusive
authority by which the U.S. government may
use, modify, distribute, or disclose the Soft-
ware. The EULA and the license set forth
therein, does not require or permit, among
other things, that Keysight: (1) Furnish techni-
cal information related to commercial com-
puter software or commercial computer
software documentation that is not customar-
ily provided to the public; or (2) Relinquish to,
or otherwise provide, the  government rights
in excess of these rights customarily provided
to the public to use, modify, reproduce,
release, perform, display, or disclose com-
mercial computer software or commercial
computer software documentation. No addi-
tional government requirements beyond those
set forth in the EULA shall apply, except to the
extent that those terms, rights, or licenses are
explicitly required from all providers of com-
mercial computer software pursuant to the
FAR and the DFARS and are set forth specifi-
cally in writing elsewhere in the EULA. Key-
sight shall be under no obligation to update,
revise or otherwise modify the Software.  With
respect to any technical data as defined by
FAR 2.101, pursuant to FAR 12.211 and
27.404.2 and DFARS 227.7102, the U.S. gov-
ernment acquires no greater than Limited
Rights as defined in FAR 27.401 or DFAR
227.7103-5 (c), as applicable in any technical
data.
Safety Summary
The following general safety precautions must
be observed during all phases of operation,
service, and repair of this product. Failure to
comply with these precautions or with specific
warnings elsewhere in this manual may impair
the protections provided by the product. In
addition, it violates safety standards of design,
manufacture, and intended use of the product.
Keysight Technologies assumes no liability for
customer's failure to comply with these
requirements.
- Do not use this product in any manner not
http://
specified by the manufacturer. The protective
features of this product may be impaired if it is
used in a manner not specified in the opera-
tion instructions.
- This product is INDOOR USE product.
- This product complies with POLLUTION
DEGREE 2 defined in IEC 61010-1.

Advertisement

Table of Contents
loading

This manual is also suitable for:

M9615a

Table of Contents