Keysight M9601A Quick Start-Up

Keysight M9601A PXIe
Precision Source/Measure Unit
Declaration of Conformity
Declarations of Conformity for this product and for other Keysight products may be downloaded from the Web. Go
to www.keysight.com/go/conformity. You can then search by product number to find the latest Declaration of
Conformity.

Installation Procedure

This document provides the brief installation procedure. Go to
M9601A Startup Guide and Keysight M9601A software installer. Refer to the Startup Guide for more information.
Please use ESD Precautions when handling and operating.
1. Unpack the module and inspect it for any shipping damage.
2. Verify the shipment contents. The following items must be included in this shipment.
- M9601A PXIe Precision Source/Measure Unit module, 1 ea.
- Connector-Terminal Block, 1 ea.
- Short Bar, 1 ea.
- Certificate of Calibration (without test data), 1 ea.
- Quick Startup Poster (this document), 1 ea.

3. Install the software.

Requirements: The followings are required for installing the software.
- Controller (desktop PC, laptop PC, rackmount PC, or PXIe embedded computer) installed with Keysight IO
Libraries Suite
- Keysight PXIe chassis which has already been set up
Copy the M9601A software installer into the controller, launch it, and follow the instruction prompts to install
the software.
Quick Startup Poster
www.keysight.com/find/m9601a and get Keysight