Step 3: Install The Software; Requirements; Installation Process - Keysight M9614A Startup Manual

Step 3: Install the Software

Step 3: Install the Software
Install the software prior to installing the PXIe modules in the chassis so that
Keysight IO Libraries Connection Expert finds them.

Requirements

The followings are required for installing the M9614A/M9615A software.
•
•
For setting up the controller and the PXIe chassis, refer to the PXIe chassis
documentation.
Minimum 1.5 GB free space is required on the controller for installing the
M9614A/M9615A software.

Installation Process

Visit
the latest version of the M9614A/M9615A software.
1. Copy the M9614A/M9615A software installer into the controller.
2. Launch the M9614A/M9615A software installer.
3. Follow the installer prompts to install the M9614A/9615A software.
4. Reboot the controller when prompted by the M9614A/M9615A software
If a firmware update is available, you can perform the firmware update by using
the M960x PXIe Source Measure Unit Soft Front Panel (the M960x SFP) after the
module installation. See
12
Controller (desktop PC, laptop PC, rackmount PC, or PXIe embedded
computer) installed with Keysight IO Libraries Suite
Keysight PXIe chassis which has already been set up
www.keysight.com/find/m9614a
installer.
or www.keysight.com/find/m9615a
"To Update the Firmware" on page
Keysight M9614A/M9615A Startup Guide, Edition 1
to get
16.