Table of Contents
Advertisement
Maintenance
Maintenance
This section describes the maintenance tasks of the M9614A/M9615A.
•
•
•
•
Cleaning
To prevent electrical shock, disconnect the chassis from the mains before
cleaning.
Use a dry soft cloth or a soft cloth slightly dampened with water or a mild soap
and water solution to clean the external surfaces of the chassis, modules, and
accessories. Do not use detergents or chemical solvents.
Do not attempt to clean internally.
To clean the connectors, use alcohol in a well-ventilated area. Allow all residual
alcohol moisture to evaporate, and the fumes to dissipate prior to energizing the
instrument.
SHOCK HAZARD
To avoid any risk of electric shock, unplug the PXIe chassis before cleaning.
RISQUE D'ÉLECTROCUTION
Pour éviter tout risque de choc électrique, débranchez le châssis PXIe avant le
nettoyage.
Do not use too much liquid in cleaning the PXIe chassis. Water can enter the
PXIe chassis panels and damage sensitive electronic components. Make sure
that the PXIe chassis is completely dry before reconnecting the power cord.
32
"Cleaning"
"Self Test"
"Self Calibration"
"Calibration"
Keysight M9614A/M9615A Startup Guide, Edition 1
Advertisement
Table of Contents
