LED Indicators
The M9614A/M9615A module has two LED indicators, Access and Status. These
indicators show the status of the module. See
emergency shutdown occurs, both indicators turn red.
Table 1-3
Measurement Terminals
The M9614A/M9615A has the following measurement terminals. You can make
2-wire connection using the High force and Low force terminals or 4-wire
connection (Kelvin connection) using the High force, Low force, High sense and
Low sense terminals. The Kelvin connection is effective for high current
measurement.
Use a three-conductor AC power cord to connect the cabinet (if used) and the
instrument to an electrical ground (safety ground).
Utilisez un cordon d'alimentation CA à trois connecteurs pour connecter la
cabine (si utilisée) et l'instrument à la mise électrique à la terre (sol de sécurité).
Keysight M9614A/M9615A Startup Guide, Edition 1
LED Status
LED
LED state
Access
Solid Green
Flashing Green
Solid Red
Off
Status
Solid Green
Solid Red
Off
Table 1-3
for the meanings. If the
Status
The module is turned on, the initialization is
completed, and the operation is ready.
The "Identify PXIe module" feature is on.
Emergency shutdown occurs.
The module is turned off.
Output is enabled.
Emergency shutdown occurs.
Output is disabled.
Front Panel Features
19