Function Switches (D2 Type) - TOHATSU BFT 200D Owner's Manual

<Trolling Mode>
The engine speed can be adjusted
with the [-] switch and [+] switch
when in trolling mode.
If you press and hold the [+] switch
while cruising with the throttle
closed, the mode changes to trolling
mode.
FUNCTION SWITCHES
(D2 type)
[-] SWITCH
Function switches are used for
operations in the fast idle mode,
trolling mode, one-lever mode and
station select mode.
https://www.boat-manuals.com/
CONTROLS AND FEATURES
<Fast Idle Mode>
The fast idle mode is only needed for
starting carbureted outboard models.
The BFT200D, BFT225D and
BFT250D models use programmed
fuel injection so, this mode will not
be needed for starting.
After the engine starts and if the
outside temperature is below
5°C (41°F), the fast idle mode can be
used to accelerate engine warm up.
[+] SWITCH
29