TOHATSU BFT 200D Owner's Manual page 88

OPERATION
1. Press on the DN (down) of the
power trim/tilt switch and trim the
outboard motor at the lowermost
position.
D2 type:
When the two or more outboard
motors are mounted:
1)Press on the DN (down) of the
power trim/tilt switch on the remote
control lever and trim the outboard
motors at the lowermost position.
2)With the outboard motors trimmed
at the lowermost position, adjust the
trim angle of the each outboard
motor using the switch on the panel.
86
R3 type:
When the two outboard motors are
mounted:
1) Press on the DN (down) of the
power trim/tilt switch on the
remote control lever and trim the
outboard motors at the lowermost
position.
https://www.boat-manuals.com/
2) With the outboard motors trimmed
at the lowermost position, adjust
the trim angle of the right and left
outboard motors using the switch
on the remote control lever
simultaneously.