TOHATSU BFT 200D Owner's Manual page 130

MAINTENANCE
<Battery Cleaning>
1. Disconnect the battery cable at the
battery negative (–) terminal, then
at the battery positive (+) terminal.
2. Remove the battery and clean the
battery terminals and battery cable
terminals with a wire brush or sand
paper.
Clean the battery with a solution of
baking soda and warm water,
taking care not to get the solution
or water in the battery cells. Dry
the battery thoroughly.
128
POSITIVE (+)
–
NEGATIVE ( )
TERMINAL
TERMINAL
3. Connect the battery positive (+)
cable to the battery positive (+)
terminal, then the battery negative
(–) cable to the battery negative (–)
terminal. Tighten the bolts and nuts
securely. Coat the battery
terminals with grease.
https://www.boat-manuals.com/
CAUTION
When disconnecting the battery
cable, be sure to disconnect at the
battery negative (–) terminal first.
To connect, connect at the
positive (+) terminal first, then at
the negative (–) terminal. Never
dis/connect the battery cable in
the reverse order, or it causes a
short circuit when a tool contacts
the terminals.