Emergency Gear Shifting (For Dbw Type) - TOHATSU BFT 200D Owner's Manual

TROUBLESHOOTING

Emergency Gear Shifting (for DBW type)

If the gear cannot be shifted, perform shift operation manually according to the following procedures and return to port
at possible engine speed.
1. Set the remote control lever in the NEUTRAL position (see page 20-21).
2. Stop the engine (see page 105).
3. Remove the engine cover (see page 56).
4. Shift gear into neutral by inserting the phillips screwdriver with the grip of the tool kit (see page 113) into the hole of
the shift actuator and moving the shaft.
SHIFT
HOLE
ACTUATOR
PHILLIPS
GRIP
SCREWDRIVER
5. Start the engine (see page 66).
6. Shift gear into "F" (Forward) or "R" (Reverse) by moving the shaft of the shift actuator with the phillips screwdriver
with the grip of the tool kit.
After returning to port, stop the engine and anchor the boat.
142
REVERSE
https://www.boat-manuals.com/
NEUTRAL
FORWARD
SHIFT
ACTUATOR
SHAFT
NEUTRAL position:
FORWARD position:
REVERSE position: