TOHATSU BFT 200D Owner's Manual page 69

When the boat is mounted with the
two outboard motors, perform the
following on the right and left
engines respectively.
1. Insert the emergency stop switch
clip at one end of the emergency
stop switch lanyard into the
emergency stop switch. Attach the
other end of the lanyard securely to
the operator.
WARNING
If the operator does not attach the
emergency stop switch lanyard,
and is thrown from the seat or out
of the boat, the out-of-control
boat can seriously injure the
operator, passengers, or
bystanders. Always properly
attach the lanyard before starting
the engine.
EMERGENCY STOP
SWITCH CLIP
The engine does not start unless the
emergency stop switch clip is set on
the emergency stop switch.
A spare emergency stop switch clip
can be stored in the tool bag (see page
113).
https://www.boat-manuals.com/
STARTING THE ENGINE
67