(R2, R3 Types) - TOHATSU BFT 200D Owner's Manual

Hide thumbs Also See for BFT 200D:
Table of Contents

Advertisement

STARTING THE ENGINE

(R2, R3 types)

EMERGENCY STOP SWITCH
EMERGENCY STOP
SWITCH CLIP
EMERGENCY STOP
SWITCH LANYARD
WARNING
Exhaust contains poisonous
carbon monoxide which can
cause unconsciousness and may
lead to death. Never run the
outboard motor in a boat house or
other confined area.
To prevent damage to the outboard
from overheating, never run the
engine with the propeller out of
water.
74
When the boat is mounted with the
two outboard motors, perform the
following on the right and left
engines respectively.
STOP
1. Insert the emergency stop switch
clip at one end of the emergency
stop switch lanyard into the
emergency stop switch. Attach the
other end of the lanyard securely to
the operator.
If the operator does not attach the
emergency stop switch lanyard,
and is thrown from the seat or out
of the boat, the out-of-control
boat can seriously injure the
operator, passengers, or
bystanders. Always properly
attach the lanyard before starting
the engine.
https://www.boat-manuals.com/
WARNING
The engine does not start unless the
emergency stop switch clip is set on
the emergency stop switch.
SPARE EMERGENCY
STOP SWITCH CLIP
(optional equipment)
A spare emergency stop switch clip
(optional equipment) can be stored in
the tool bag.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bft 225dBft 250d

Table of Contents