Gear Shifting (D2 Type) - TOHATSU BFT 200D Owner's Manual

Gear Shifting
(D2 type)
SINGLE TYPE
REMOTE
CONTROL
LEVER
CAUTION
Avoid sharp and abrupt operation
of the control lever. Operate it
moderately. Operate the control
lever and raise the engine speed
after making sure that the gear
was shifted securely.
Move the control lever(s)
approximately 20° toward the
FORWARD or REVERSE position to
engage the desired gear.
DUAL TYPE
REMOTE CONTROL LEVERS
When the boat is mounted with the
two outboard motors, hold the control
lever in the center as shown, and
operate the right and left levers
simultaneously.
https://www.boat-manuals.com/
NEUTRAL
FORWARD
REMOTE
CONTROL
LEVER
Moving the control lever(s) further
from approximately 20° will increase
throttle opening and boat speed.
OPERATION
REVERSE
FORWARD
NEUTRAL
REVERSE
81