Table of Contents
Advertisement
CONTROLS AND FEATURES
Tachometer
(optional equipment)
TACHOMETER
The tachometer shows the engine
speed in revolutions per minute.
42
NMEA Interface Coupler
The NMEA2000 interface coupler
can provide information regarding
engine speed, fuel consumption, and
various warnings to an existing
NMEA2000 network via an optional
interface cable. Contact your dealer
for more information.
NMEA INTERFACE
COUPLER
https://www.boat-manuals.com/
Operating Hour Notification
System
This outboard motor engine counts
the number of operating hours since
the last periodic maintenance. When
the next periodic maintenance is due,
the engine notifies the NMEA2000
network, and a maintenance
indication is displayed on an
NMEA2000-compatible device.
After periodic maintenance is
performed, reset the hour counter by:
DBW type:
1. Stopping the engine.
2. Turning the ignition switch or
power switch ON.
3. Setting the gearshift at F or R.
4. Putting in and pull out the
emergency stop switch clip 5 times
within 20 seconds.
The buzzer will sound once when
the hour counter is reset.
Advertisement
Table of Contents
