Table of Contents
Advertisement
POWER TRIM/TILT SWITCH
Press UP to
raise bow.
Press DN to
lower bow.
POWER TRIM/TILT SWITCH
Press UP to
raise bow.
Press DN to
lower bow.
Consult an authorized TOHATSU
Outboard Motor dealer for the
method to adjust the tilt limit switch.
Press either UP or DN (down) of the
power trim/tilt switch and tilt the
outboard motor to the best position in
compliance with the cruising
conditions.
(R1 type)
POWER TRIM/TILT SWITCH (R3 type)
Press UP to
raise bow.
REMOTE
Press DN to
CONTROL
lower bow.
LEVER
POWER TRIM/TILT SWITCH
(R2 type)
(LEFT)
REMOTE
CONTROL
LEVER
The power trim/tilt system operates
when the switch is pressed, and it
stops when the switch is released.
To trim up slightly, press on UP
momentarily but securely.
To trim down slightly, press on DN
(down) in the same manner.
https://www.boat-manuals.com/
PTT SWITCH PANEL
Single Type
Press UP to
REMOTE
raise bow
CONTROL
LEVER
Press DN to
lower bow.
POWER TRIM/TILT SWITCH
(RIGHT)
Dual Type
Press UP to
raise bow
Press DN to
REMOTE
lower bow.
CONTROL
LEVER
POWER TRIM/TILT SWITCH
For multiple outboard motors, the
trim/tilt angle of all outboard motors
is adjusted at the same time by using
the power trim/tilt switch on the
remote control lever and the trim/tilt
angle of each outboard motor is
adjusted by using each power trim/tilt
switch on the panel.
OPERATION
DUAL TYPE
TRIPLE TYPE
91
Advertisement
Table of Contents
