Neutral Release Lever; Engine Switch - TOHATSU BFT 200D Owner's Manual

Neutral Release Lever

(D1 type)
REMOTE
CONTROL
LEVER
(R1 type)
REMOTE CONTROL LEVER
NEUTRAL
RELEASE LEVER
(R2 type)
REMOTE CONTROL LEVER
NEUTRAL
RELEASE LEVER

Engine Switch

(R1 type)
NEUTRAL
RELEASE
LEVER
The neutral release lever is set on the
remote control lever to prevent an
accidental operation of the remote
control lever.
The remote control lever does not
operate unless it is moved while
pulling the neutral release lever up.
This remote control is equipped with
an automotive type engine switch.
On the flush-mount type (D1 type),
the top-mount type (D2 type), the
engine switch locates on the key
switch panel.
https://www.boat-manuals.com/
CONTROLS AND FEATURES
(D1, D2 without START/STOP Switch type)
(R2, R3 type)
START
ON
ENGINE
OFF
SWITCH
KEY
OFF
ON
OFF
ON
START
ENGINE SWITCH KEY
On the side-mount type (R1 type), the
engine switch locates on your side
near the remote control box.
On the flush-mount type (R2 type)
and the top-mount type (R3 type), the
engine switch locates at the center of
the switch panel.
Key positions:
START: to start the engine.
ON: to run the engine after starting.
OFF: to stop the engine
(IGNITION OFF).
START
25