Chapter 5 - Browser Remote Control; Overview - AJA Ki Pro Ultra Installation And Operation Manual

Chapter 5 – Browser Remote Control

Overview

An optimized web server running on Ki Pro Ultra allows you to remotely monitor
and adjust parameter settings via a browser client running on a network wired
computer. The network can be a closed local area network, a straight computer-
to-Ki Pro Ultra cable connection, or even exposed through a firewall to a
broadband WAN.
NOTE: Exposing Ki Pro Ultra on a broadband WAN is not generally recommended since
The LAN connection on Ki Pro Ultra uses a standard RJ-45 connector, but
internally it's intelligent and communicates via standard "straight-through" CAT 5
Ethernet cables or null-modem (cross-over) cables without any configuration or
strapping required.
Preferred web browsers for Ki Pro Ultra control include:
Mac OS
• Safari
• Firefox
Windows OS
• Chrome
• Firefox
NOTE: Other web browsers may work, but AJA cannot guarantee consistent operation
To control Ki Pro Ultra remotely, connect a computer to the Ki Pro Ultra's LAN
connector, an RJ-45 socket, via a CAT5 Ethernet cable.
To access Ki Pro Ultra, enter its URL in the web browser. The URL will be the IP
address defined in Ki Pro Ultra's Network parameter menus (Note that Config
menu parameters 50.1 through 50.4 must all be configured correctly to access
Ki Pro Ultra File Based Recorder/Player v3.3r1
anyone on the internet could potentially access Ki Pro Ultra.
for all web browsers or web browser versions. If you do experience an unexpected
behavior when using a particular web browser or web browser version to interact
with Ki Pro Ultra, consider using an alternate web browser and report any issues
experienced to AJA Technical Support.
60 www.aja.com