AJA Ki Pro Ultra Installation And Operation Manual page 46

1.65 Playback Image Division
This parameter is used to select between Square Division or Two Sample
Interleave output format (4K and UltraHD signals only). Menu options are:
Auto (default)
Square
2SI
NOTE: For ProRes recorded files, there is no way to record image division format
NOTE: If Menu 1.6 "SDI Out" has one of the following SDI outputs selected, playback is
• SDI 1 RGB
• SDI 1 YCbCr
1.66 HDMI Out
This parameter determines whether cropped, scaled or full raster video will be
output.
NOTE: Full Raster output disables the Super Out feature; superimposed timecode and
Crop
Crop and Scaled
Scaled (Default)
Full Raster
Helpful HDMI configuration guidelines:
• Determine your video source format and frame rate.
• Decide whether you want a Full Raster or Scaled output.
• Determine whether your connected device can support 4096x2160 or
3840x2160.
• Remember that the Progressive Playback menu parameter needs to be
configured for Progressive for HDMI output.
1.68 HDMI/EDID Override
This parameter determines whether the HDMI Output is auto-negotiated with the
receiving device via EDID (extended display identification data) or via a specified
output type.
These are the options:
• Auto (default) – The HDMI output is negotiated automatically with the
receiving device via EDID
• 10-bit YCbCr – Configures the HDMI output for 10-bit YCbCr
• 8-bit RGB – Configures the HDMI output for 8-bit RGB
• 4K 4:2:0 (High FR)
NOTE: Typically, you will want to simply leave the selection configured for Auto so that
Ki Pro Ultra File Based Recorder/Player v3.3r1
In EtoE mode, follow the input signal image division format.
In Playback mode, follow the input signal format configuration.
Forces the output to use Square Division.
Forces the output to use Two Sample Interleave.
information (VPID data is not recorded).
automatically selected and the "Playback Image Division" parameter setting has
no effect.
transport state is not possible with a 4K or UltraHD HDMI output.
If the raster is 4K the HDMI Out is cropped to UltraHD. If 2K the
HDMI Out is cropped and scaled where applicable. If the raster is
If the raster is 4K the HDMI Out is scaled to 2K. If the raster is
No cropping or scaling is applied. The HDMI Out raster is 1:1 and
the negotiation between the devices is handled automatically.
HDMI Out is cropped to 1080. Other rasters are unchanged.
2K/UltraHD/4K cropping and scaling is applied so the output is
1080.
UltraHD the HDMI Out is scaled to 1080.
may be 4K or UltraHD.
46 www.aja.com