Applying Power - AJA Ki Pro Ultra Installation And Operation Manual

Applying Power

The following Warnings are provided as good practices and should always be
considered when Ki Pro Ultra is used in a desktop application.
Caution!
A polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet
Caution!
remain readily accessible and operable.
Caution!
plugs, convenience receptacles, and the point where they exit from the device.
Caution!
periods of time.
Using AC Power
To begin using Ki Pro Ultra, plug the 4-pin XLR on the supplied AC adapter into
the XLR power socket on the back of Ki Pro Ultra. Then plug the AC adapter line
cord into 110 VAC or 230 VAC (the supply is auto sensing).
NOTE: When connected to power, Ki Pro Ultra will immediately begin the power-up
Figure 5. Ki Pro Ultra Power Supply Connections
4-pin XLR
Power Socket
Using DC Power
To run Ki Pro Ultra on DC power, plug a 3rd-party industry standard 12 Volt
battery pack with a 4-pin female XLR connector into the power connector on
Ki Pro Ultra (underneath unit). The battery should be capable of supplying a
sustained 3.3 A (as is supplied by the AC Adapter provided). Battery packs are
available from a variety of sources.
NOTE: To operate Ki Pro Ultra properly, batteries should not have voltage lower than 12
Ki Pro Ultra File Based Recorder/Player v3.3r1
Do not defeat the safety purpose of the polarized or grounding-type plug.
Since the Mains plug is used as the disconnection for the device, it must
Protect the power cord from being walked on or pinched particularly at
Unplug this device during lightning storms or when unused for long
.
procedure. This automatic start-up allows the unit to return to operation as soon
as an unexpected power interruption is corrected.
volts and should not have voltage that exceeds 18 volts.
DC Supply
21
.
.
Line
Cord
www.aja.com