AJA Ki Pro Ultra Installation And Operation Manual page 16

SDI Monitor Out
One SDI Monitor Out connector provides for monitoring compatible video and
multi-channel embedded audio.
Analog Audio Monitor Output
Two RCA connectors provide line level analog audio output, carrying the same
signal sent to the front panel headphone output.
HDMI Input and Output
Two HDMI connectors (one input and one output) support HDMI video and
multi-channel embedded audio, and use standard HDMI cables. HDCP is not
supported on the input or output.
NOTE: Which audio channels are embedded to the HDMI Output is determined by the
HDMI formats supported
• 720p 50, 59.94, 60
• 1080i 25, 29.97, 30
• 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• 2Kx1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
• Ultra HD (3840x2160p) 23.98, 24, 25, 29.97, 30, 50*, 59.94*, 60*
• 4K (4096x2160p) 23.98, 24, 25, 29.97, 30, 50*, 59.94*, 60*
NOTE: When using the Ki Pro Ultra HDMI connection and attaching it to any HDMI
Ethernet
An RJ-45 connector provides a 10/100/1000 Ethernet port for connecting
Ki Pro Ultra directly to a computer or Ethernet hub or switch for connecting to a
LAN. Ki Pro Ultra is compatible with CAT-5 straight-through or cross-over Ethernet
cables, automatically detecting which is used. Once connected and properly
configured, Ki Pro Ultra can then be controlled by a web browser on the LAN.
8-Channel Balanced Analog Audio I/O
Two DB-25 TASCAM pinout, one input and one output, provide 8-channel
balanced audio. Audio is high-quality 24-bit A/D input and D/A output at 48kHz.
Level adjustments are made via software. Software level adjustments for analog
audio (parameter 4.1) apply to balanced audio.
AES Digital Audio I/O
AES digital audio connections consist of one DB-25 TASCAM pinout for 8 channels
of input and 8 channels of output.
RS-422 Connector
Ki Pro Ultra offers a 9-pin serial port that may be used with some RS-422 devices.
Ki Pro Ultra File Based Recorder/Player v3.3r1
audio embedding settings being used for the Ki Pro Ultra audio input, or the
audio channels of the clip being played back.
audio or video accessory, you must use a ferrite-beaded HDMI cable, HH-28F-06,
between the HDMI output port of the Ki Pro Ultra and the HDMI accessory to
maintain regulatory compliance.
16 www.aja.com