AJA Ki Pro Ultra Installation And Operation Manual page 53

Example
The 41.1 Video SG Frmt is set to 1080p 23.98 RGB and the 1.6 SDI Out is set to SDI
1 RGB, then the output will be RGB. If the 41.1 Video SG Frmt is set to 1080p 23.98
RGB and the 1.6 SDI Out is set to SDI 1 YCbCr, then the output will be YCbCr even
though the signal generator was configured for RGB.
Select the video format desired for the test signal output:
720p 50
720p 59.94
720p 60
1080i 25
1080i 29.97
1080i 30
1080PsF 23.98
1080PsF 24
1080PsF 25
1080PsF 29.97
1080p 23.98
1080p 24
1080p 25
1080p 29.97
1080p 23.98 RGB
1080p 24 RGB
1080p 25 RGB
1080p 29.97 RGB
1080p 30 RGB
1080PsF 23.98 RGB
1080PsF 24 RGB
1080PsF 25 RGB
1080PsF 29.97 RGB
1080p 30
1080p 50
1080p 59.94
1080p 60
41.2 Video SG
This parameter determines the video signal output from Ki Pro Ultra's internal
test signal generator. This parameter is used with parameter 41.1 to determine the
type of video test signal output by Ki Pro Ultra.
OFF (default)
Black
75% Bars
100% Bars
NOTE: The signal generator acts as a "substitute" for the video input. Because of this, if
Ki Pro Ultra File Based Recorder/Player v3.3r1
the Video SG is configured for Black, 75% Bars or 100% Bars, you may record these
signal generators as a file. Additionally, if the 41.1 Video SG Frmt parameter is
configured for an RGB format, then the 1.6 SDI Out menu parameter should be set
up for an RGB output if RGB is desired. Note that it is also possible to configure the
SDI Out for YCbCr when the Video SG Frmt is configured for RGB, but a color space
conversion will be applied to the video output.
2K p23.98
2K p23.98 RGB
2K p24
2K p24 RGB
2K p25
2K p25 RGB
2K p29.97
2K p29.97 RGB
2K p50
2K p59.94
2K p60
2K PsF 23.98
2K PsF 23.98 RGB
2K PsF24
2K PsF24 RGB
2K PsF25
2K PsF25 RGB
2K PsF29.97
2K PsF29.97 RGB
Turn test signal output OFF.
Video test signal output is color black.
Video test signal output is 75% color bars. This 75%
amplitude,100% saturation test signal is useful to check low
frequency response and video tilt as well as the performance
of video clamping.
Video test signal output is 100% color bars. This 100% white
full-field bars test signal is helpful to check chroma amplitude
versus overall video level.
53
UltraHD p23.98
UltraHD p23.98 RGB
UltraHD p24
UltraHD p24 RGB
UltraHD p25
UltraHD p25 RGB
UltraHD p29.97
UltraHD p29.97 RGB
UltraHD p50
UltraHD p59.94
UltraHD p60
4K p23.98
4K p23.98 RGB
4K p24
4K p24 RGB
4K p25
4K p25 RGB
4K p29.97
4K p29.97 RGB
4K p50
4K p59.94
4K p60
www.aja.com