AJA Ki Pro Ultra Installation And Operation Manual page 67

Figure 24. Gang Recording Screen
Click a system name to switch the browser to that particular Ki Pro Ultra system.
NOTE: You must have a properly configured default gateway to see the Ki Pro Ultras.
Multiple Ki Pro Ultra units can be used in unison to produce recordings via
the Gang Control feature. This feature is only available via the web UI when
Ki Pro Ultra units have IP addresses configured under a common network and
subnet mask and are connected via their LAN connections to an Ethernet switch
or hub to a host computer. AJA recommends that all Ki Pro Ultra units in a gang
use the same firmware version.
Example
You have a Ki Pro Ultra "Master" a Ki Pro Ultra "Subordinate" both attached on a
network where their static IP addresses are 192.168.0.2 and 192.168.0.3, both with
a subnet mask value of 255.255.255.0. They are connected to a host computer
with IP address 192.168.0.1 and subnet mask 255.255.255.0. The host computer
uses a web browser, like Apple's Safari, to access the "Master" Ki Pro Ultra by
entering 192.168.0.2 in the URL field of the browser. The Ki Pro Ultra "Master" unit
web UI should appear. Locate the Gang Controls area in the user interface.
Parameters for each available Ki Pro Ultra will appear in the Gang Controls area.
These include:
• System – displays Ki Pro Ultra units that may be added to a gang
• Record Format – type of video format/frame rate each system is configured to
record
• Free Storage – at-a-glance view of the capacity of the media in each unit
• Gang – units can be added or removed from the gang
• Master – allows the promotion of a Ki Pro Ultra unit to the controlling role
• Settings – allows for the configuration of clip names on the Master and
Subordinate Ki Pro Ultra units
Ki Pro Ultra File Based Recorder/Player v3.3r1
If the Default Gateway (parameter 50.4) is not configured properly, other
Ki Pro Ultras will not be listed.
67 www.aja.com