AJA Ki Pro Ultra Installation And Operation Manual page 59

These example menu parameters and settings would do it:
1.4
1.5
1.6
1.8
2.1
No In Convert has been selected so the signal that is recorded on the Ki Pro Ultra
media is the same as what is output by the camera. An Out Convert selection
has also not been made because the parameter does not allow conversion if the
incoming video signal is 1080; if a conversion were selected, the output signal
would not be affected. The SDI output is set to SDI 1 YCbCr. The only valid output
selections would be SDI 1 YCbCr operating at 3G or SDI 1-2 YCbCr operating at
dual link 1.485Gbps.
Ki Pro Ultra File Based Recorder/Player v3.3r1
In Convert
Out Convert
SDI Out
SDI Output
Video Input
None
None
SDI 1 YCbCr
None
SDI 1 YCbCr
59 www.aja.com