Connections - AJA Ki Pro Ultra Installation And Operation Manual

Connections

• Reference video loop for connection to a stable source of genlock video or
sync
• LTC Input and Output (2x BNC)
• HDMI v1.4b & v2.0 compatible input and output up to 4K/UltraHD 50/59.94/60
4:2:2 YCbCr or 4:4:4 RGB with up to 8-channel embedded audio
• 10/100/1000 Ethernet LAN
• Dual-channel Fiber Inputs 1-4/Outputs 1-4
• HD/3G-SDI Inputs and Outputs 1-4, with up to 16-channel embedded audio
(8x BNC)
• HD-SDI Monitor Output (1 BNC) with embedded audio.
• Balanced 8-channel Analog Audio Input via one DB-25 TASCAM pinout
• Balanced 8-channel Analog Audio Output via one DB-25 TASCAM pinout
• AES EBU 8-channel Audio Input and Output via one DB-25 TASCAM pinout
• RS-422 DB-9 Machine Control Interface (Sony 9 Pin protocol)
• Dual Mono Analog Audio Output via 2 RCA Connectors
Ref Loop
The Reference Loop BNCs accept an output timing reference signal. The reference
can be analog SD blackburst or HD tri-level sync. Examples of permissible
reference video input signals:
• 525 Color Black
• 625 Color Black
• 1080i Tri-level Sync
• 720p Tri-level Sync
The 2 BNCs are a passive loop: one BNC is for the Input, and the remaining BNC
can be connected to another piece of equipment in the reference chain or
terminated.
NOTE: For proper operation the input reference signal must be stable and properly
LTC Timecode I/O
Two BNCs provide connections to the house LTC timecode generator or source.
Connections are high impedance. One BNC is for input and the other for output.
SFP In/Out (optional)
Four duplex SFP cages (two input, two output) accept optional SFP modules. All
Ki Pro Ultra's SFP I/O ports support up to 3G SDI operation.
SDI Inputs and Outputs
Eight BNC connectors (four inputs and four outputs) are provided supporting
HD/3G-SDI video and embedded 24-bit digital audio.
NOTE: Which audio channels are embedded to the SDI Outputs is determined by the
Ki Pro Ultra File Based Recorder/Player v3.3r1
terminated using a 75-ohm terminator on either the unused loop connector
or the last piece of downstream equipment to which the reference video is
connected.
audio embedding settings being used for the Ki Pro Ultra audio input, or the
audio channels of the clip being played back.
15 www.aja.com