AJA Ki Pro Ultra Installation And Operation Manual page 55

50.4 Static Gateway
This parameter determines the gateway or router used by Ki Pro Ultra on your
LAN for TCP/IP networking.
Figure 17. Static Gateway Screen with Keypad
variable
NOTE: Without a properly configured default gateway (whether you have a router/
50.5 System Name
This parameter defines a name for Ki Pro Ultra and gives it a unique identifier. This
same name is used both when displaying systems via the web interface.
variable
Ki Pro Ultra File Based Recorder/Player v3.3r1
gateway or not), Ki Pro Ultra will be unable to see other Ki Pros on the network,
although you may still be able to control the Ki Pro Ultra via a web browser. Also,
without a proper gateway defined, the discovery feature "Available Ki Pros—Click
to Refresh" on the Network web page will not work correctly and list other Ki Pros
or FS1s on the network.
Using the Adjust buttons, enter a gateway compatible with
your LAN (if you have one). This is only needed for Static IP
configurations.
NOTE: If 50.1 is set to DHCP, the default gateway will be
assigned by the DHCP server.
NOTE: If 50.1 is set to Default Addr, the default gateway is:
10.0.0.1.
Using the User Control Knob, enter a name for Ki Pro Ultra.
Using the User Control Knob, select the characters for each
of the up to 20-character name. The character set allowed
is: 0 through 9, '-','.', A through Z (uppercase) and a through z
(lowercase). Default: Ki Pro Ultra
55 www.aja.com