Operation And Function Of The Com. Setting （Communication Setting) - KYOWA WGA-910A Series Instruction Manual

3-8 OPERATION AND FUNCTION OF THE COM. SETTING （COMMUNICATION SETTING)
(1) Communication Speed
Sets the communication speed (baud rate) of the RS-485.
<Setting Range>
2400, 4800, 9600, 19200 (bps)
<How to operate>
1) Press the
2) Press the
3) Press the
4) Press the
5) Press the
6) Press the target key and
設定
ﾂﾘ―
key on the "Measuring" window.
key on the "Setting (1/2)" window.
key on the "Setting (2/2)" window.
key on the "Option Setting" window.
key on the "Com. Setting" window.
key to register the target value.
Detecting
Holding
Setting
Wave Display Setting
Setting
Option Setting
BCD Output Setting
D/A Output Setting
Com.Setting
Communication Speed
Communication Speed
Push the target key and 'Register'key.
24
Switch Hold Zero
LL LO OK HI HH
Block Peak-Bottom
HH 999.99 HI
LO - 150.00 LL - 999.99
Calibration is conducted with
Calibration
sensor by 'Manual Input','TEDS
Auto'or'TEDS Part'Cal.
'Smoothing','Additional Value'
Input Setting
and 'Zero Compensation'are set
The sensor output is monitored
'Comparison'and 'Measure Mode'
Meas.Cond.Setting
setting are set as measure-
ment condition.
The necessary setting to dis-
play the wave such as 'X-axis'
and 'Y-axis'are set.
Next
'Meas.Select Signal'
Initial Setting
'System', 'Self/Operation
Check'and 'SD Card'
'Communication', 'BCD Output',
Option Setting
'DA Output'and 'CC-Link'
are set.
Previous
Return
'Communication Speed','Trans-
Com.Setting
mission Mode'and 'Device ID'
of RS-232C/485 are set.
'Transmission Speed',logic of
each output,and 'BCD Classifi-
cation are set.
'Zero Dsp.'(0V) or 'Full Dsp.'
(10V),and 'D/A Classifica-
tion' are set.
'The Number of Occupied
CC-Link Setting
Stations','Transmission Speed'
and 'Station Number' are set.
Return
The communication speed of RS-
232C and RS-485 is set.
9600bps
The transmission mode of com-
Transmission Mode
munication such as the oper-
ation by command is set.
Repeat.Output
It is only applied to RS-485.
Device ID
The ID of WGA-910A is set.
1
Return
Now
19200bps
New
9600bps
2400bps 4800bps
9600bps 19200bps
Set
Measure 1
kN
500.00
Measure
1 / 2
Measure
2 / 2
Measure
Measure
Measure
Register