Network Settings Panel; Inputs Panel - Extron electronics ISS 608 User Manual

Network Settings Panel

In the Network Settings panel (see figure 41,
subnet mask, and gateway address for your ISS, and turn DHCP On and Off.
To set the IP addresses:
1. Click EDIT (see figure 44 [left],
Settings panel opens to allow edits (right).
Figure 44.
2. Edit the network settings as desired:
a. Click the DHCP switch (
the unit configures its IP address and other network settings from the DHCP server.
The default is Off.
b. To set any of the addresses (IP Address (
address (
3.
When finished editing, click SAVE to confirm your changes or CANCEL to close the
window without making changes. Clicking the X in the upper-right corner of the screen
also closes the window.

Inputs Panel

The Inputs panel (see figure 41,
page 68) displays the signal type of the
active input signal as well as its HDCP status.
To view the status and type of all inputs, click
the 6 MORE link (see figure 45) in the Inputs
panel to view the Inputs dialog box (see
figure 46
The following HDCP status indicators may be
displayed for a connected HDMI input:
Symbol
No Signal
) in the Network Settings panel. The Network
1
Network Settings Panel
) to toggle DHCP on and off. When DHCP is enabled (On),
2
), click in the desired field and enter the address.
5
4
on page 71).
Definition
The signal is HDCP encrypted.
The signal is not encrypted.
There is no signal detected.
on page 68), set the IP address,
3
), Subnet mask (
3
, on
Figure 45. Inputs Panel
ISS 608 Seamless Switcher • Internal Web Page
), and Gateway
4
70