Extron electronics ISS 608 User Manual page 67

3. If there is no direct link to your software, click the Software link (
4. Scroll down to the alphabetic navigation bar (see figure 26).
Figure 26. Software Installation
5. Click the appropriate letter to locate the software or firmware.
6. Click Download and follow the on-screen instructions (see figure 27,
Figure 27. PCS Software Download
For Firmware:
Figure 28. Firmware Page with Alphabetic Navigation Bar
a. Click the letter I from the alphabetic navigation bar (see figure 28,
b. Scroll down the page to find the firmware for the ISS 608.
c. (Optional) Click Release Notes (
update.
d. Click Download (
3
e. Enter the required user information and click Download. An executable (.exe) file is
downloaded to the PC. Run this program to place the firmware on the PC for future
use. Make a note of the folder where the firmware file was saved.
7. Install the software.
a. Navigate to the folder where the software file was downloaded.
b. Double-click the executable file and follow the on-screen directions to install the
software.
For Firmware:
a. To install via PCS, see Update Firmware in the
b. To install via the internal web pages, see the
) for more information about the firmware
2
). The product download screen opens.
Device Menu
Firmware Panel
ISS 608 Seamless Switcher • Configuration Software
).
2
for PCS).
1
).
1
on page 65.
on page 72.
59