Effect Configuration Menu - Extron electronics ISS 608 User Manual

Effect Configuration Menu

Figure 15 shows an overview of the Effect Configuration menu, the submenus, and the
available settings.
From the Effect Configuration menu, press NEXT to enter the submenus, and rotate
ether of the ADJUST knobs to scroll to the desired effect.
NOTE: The front panel effect button does not light when configuring the effect. The
MENU
Effect
Configuration
NEXT
Menu
Effect
Dissolve
or
Menu
Rotate to
select an effect
NEXT
Effect Duration
2 sec.
or
Rotate to adjust effect duration
Figure 15.
Dissolve
Set the duration of the dissolve effect applied when switching the preview output to the
program output:
1.
2.
NOTE: Directly access the Effect Dissolve submenu by pressing the EFFECTS
effect button only lights when it is selected.
MENU
NEXT w WIPE NEXT w PIP
selected selected
Wipe Direction Recall PIP
Preset N/A
Soft Up
NEXT
or
or
Rotate to
Save PIP
select wipe
Preset 001
direction
NEXT
NEXT
or
Clear PIP
Preset 002
NEXT
or
PIP Audio Follow
Main
or
NEXT
Effect Configuration Menu
From the Effect Dissolve submenu press NEXT. The Dissolve Duration submenu
displays.
Use either ADJUST knob to select the effect duration from 0.1 seconds to 5.0 seconds
second increments. The default is 0.5 seconds.
in
0.1
DISSOLVE button.
NEXT w VIDEO KEY
selected
Video Key Effect
Level
Rotate to
Rotate to select
select a preset #
or
a key effect
to recall
NEXT w TRANS-
PARENCY selected
Rotate to
select a preset #
to save
Video Key Effect
Transparency 128
Rotate to select
or
a preset #
Rotate to select
to clear
opacity level
NEXT
Rotate to select
PIP or Main audio
ISS 608 Seamless Switcher • Operation
NEXT w LEVEL NEXT w RGB
selected selected
Video Key Effect Video Key Effect
Level 128
<R>GB 128
or &
Rotate to select Rotate
luminance level
Rotate to adjust level
NEXT
NEXT
to select color
20