Extron electronics ISS 608 User Manual page 49

X6# =
Screen saver status
0 = Active input detected - timer not running
1 = No active inputs - timer is running - output sync
still active
2 = No active inputs - timer has expired - output
sync disabled
X6( =
Hot Plug change/detect
1 = Assertion (a new sink has been connected)
2 = De-Assert (a sink has been disconnected)
X7) =
Effect variable
0 = Transparency (not available for screen saver or
background)
1 = Red of RGB Key
2 = Green of RGB Key
3 = Blue of RGB Key
4 = Level Key (not available for screen saver or
background)
X7! = Effect setting — 0 to 255
X7# = Effect duration — 01 to 50, in 0.1 second
increments (Default = 05 = 0.5 seconds)
X7$ =
Key effect
0 = Disabled (only used for Logo Key Effect)
1 = Transparency
2 = RGB Key
3 = Level Key
4 = Alpha Key (only used for Logo Key Effect)
X7% =
Color/background options
0 = Black (Default)
1 = Red
2 = Green
3 = Blue
4 = White
X7* =
RGB color value — 0 to 255
X7( =
Preview switch mode
0 = Swap (Default)
1 = Stay
X8) =
Logo assignments (three-digit response, 0 padding)
1-16 = Logos (available to all scaled outputs)
101 =
No Signal/Screen Saver Image
201 = HDCP Image
301 = Background Image
X8! =
Verbose mode
0 = None (Default for LAN connection)
1 = Verbose mode (Default for RS-232 and
USB connection)
2 = Tagged responses to queries
3 = Verbose mode and tagged responses
X8% =
Password — Maximum length 128 characters. All
alpha-numeric characters permitted except |, and
"space".
NOTE: The factory configured passwords
for all accounts on this device have been
set to the device serial number. In the event
of a complete system reset, the passwords
convert to the default, which is no password.
5 = Magenta
6 = Cyan
7 = Yellow
8 = User defined color
9 = User image file
ISS 608 Seamless Switcher • SIS Configuration and Control
X8& = Device name — 63 characters, max, drawn from
the alphabet (A-Z), digits (0-9), minus sign/hyphen
(-). No blank or space characters are permitted. Not
case sensitive. The first character must be an alpha
character. The last character must not be a minus
sign/hyphen.
Must comply with internet host name standards.
X8( =
Time zone acronym (
X9) =
Greenwich Mean Time (GMT) offset value: -12:00
to 14:00. Represents hours and minutes (HH:MM)
offset from GMT including the time zone name.
X9! =
IP address in dotted decimal notation
(xxx.xxx.xxx.xxx)
Default: 192.168.254.254 (no padding)
Default gateway IP address: 0.0.0.0
Default DNS server IP address: 0.0.0.0
X9@ =
Subnet mask
Default: 255.255.255.0 (no padding)
X9# =
Hardware MAC address — (00-05-A6-NN-NN-NN)
X9$ =
Default name — Combination of the model name and
the last three pairs of the MAC address (Example:
ISS-608-13-59-0C)
2 6
to letters)
41