Setting Up The Network - Barco OV-508 Installation Manual

5.18 Setting up the network

Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
Connect the power strips of the display wall to the
wall outlet. DO NOT CASCADE the power strips!!
The projection modules will have to be addressed by
a unique IP address. In case this IP address is
assigned via a DHCP server, you may switch on all
projection systems.
In case the IP address is static, ONLY switch on one
projection module!
Proceed with setting up the network as described in
the respective chapter in the manual of the web
interface.
________________________________________________
________________________________ ________________________________
5. Installation
Step 58
________________ 50
________________ ________________