Table of Contents
Advertisement
Mark the static screen!
The static screen defines the movability of all screens in a display wall.
Dismounting a screen requires the knowledge of it's movability.
Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
The static screen itself and also the projection module
equipped with the static screen has to be labeled!
Wrt screen, put the label between the two facilites to
block horizontal mevement.
For the label and the position of the label on the
profile see picture on the right!
It is mandatory to stick to the rule mentioned above
and also to put on the label.
In case the screens have to be removed (either the
display wall has to be de-installed, or either a screen
has to be replaced) there is a high risk of crashing all
screens if the static screen is not known!
________________________________________________
________________________________
________________________________
5. Installation
Step4
________________ 37
________________
________________
Advertisement
Table of Contents
