Barco OV-508 Installation Manual page 46

Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
Position and align the brush to the top edge of the
dark box.
Carefully fix the brush to the darkbox. Take care that
the bristles are aligned with black metal border of
the screen!
Proceed accordingly to attach the brush on the next
module.
Take care for a neat and proper joint!
When all the vertical brushes are attached, proceed
with the horizontal brushes on the bottom row.
Please note:
Since the brush is in-between the support profiles, it
has to be cut by 2x30 = 60mm.
Use a saw to adjust the length!
You have to shorten half of the horizontal brushes!
Position, align and attach the shortened brush on the
bottom of the module in-between the support
profiles. Take care that the bristles are aligned with
the black metal border of the screen to make sure
that there is no light gap!
Finally attach the brushes on the top row! Take care
for a neat and proper joint to the vertical brushes!
________________________________________________
________________________________ ________________________________
5. Installation
Step17
Step18
Step19
Step20
Step21
________________ 41
________________ ________________