Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
Care for a close connection between illumination unit
and projection unit!
When the illumination unit and the projection unit of
all projection modules of a display wall are installed,
proceed with the cabling.
In case the projection module has to be equipped
with a Multi Input Module, the support for the Multi
Input Module has to be installed on the left side of
the dark box.
Insert two moveable nuts into the rear verticle profile
________________________________________________
________________________________
________________________________
5. Installation
Step 47
Step 48
Step 49
________________ 45
________________
________________