Table of Contents
Advertisement
Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
In case of a curved setup,
Connect the pedestals by means of the respective
connection kit.
There are two connection kits at the front and one at
the rear side.
(In case the height of the pedestal exceeds 1100mm,
connection on the rear side is also done by two
connection kits).
Insert the blocks between adjacent vertical front
profiles and fix them from the left and from the right
by means of 2 times M6x35 and nuts and washers.
On the rear side,
Fix the sheet metal to the rear vertical profiles by
menas of 4 M6x35.
Level the pedestals!
________________________________________________
________________________________
________________________________
5. Installation
Step 22
Step 23
________________ 23
________________
________________
Advertisement
Table of Contents
