Barco OV-508 Installation Manual page 23

Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
Install the angle for the power strip(s) and the LAN
switch.
The power strip includes 6xIEC 320 sockets and is
rated for a max. current of 10A.
Always take care that the max. rating of the power
strip is not exceeded!
In case the installation site is in a 110V country, and
in case the display wall is higher than 3 rows, an
additional power strip has to be installed.
Of course the two power strips may not be connected
in serie!
In 110V countries, at max. 3 darkboxes may be
connected to a power strip!
In case the column does not require to be equipped
with a LAN switch, install the angle with the multi
power strip.
Mount the angle bracket to the profiles using the
moveable nuts inserted in the profiles.
In case the column does require to be equipped with
a LAN switch, and the powerstrip is already mounted
to the angle, demount it!
Mount the angle bracket to the profiles using the
moveable nuts inserted in the profiles.
________________________________________________
________________________________ ________________________________
5. Installation
Step 09
Step 10
Step 11
________________ 18
________________ ________________