Table of Contents
Advertisement
6.11 Rotation
Rotation distortion is adjusted by the screw F
6.12 Horizontal picture shift
Horizontal picture shift is adjusted by the screw C
Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
Turn the rotation adjustment screw F clockwise until
the horizontal lines gets parallel to the border of the
screen.
Turn
the
rotation
counterclockwise until the horizontal lines get parallel
to the border of the screen.
Use the adjustment screws for horizontal lens shift C.
Tighten the left and loosen the right screw to move
the picture to the right.
Use the adjustment screws for horizontal lens shift C.
Loosen the left and tighten the right screw to move
the picture to the right.
________________________________________________
________________________________
________________________________
6. Optical adjustment
adjustment
screw
________________ 59
________________
________________
F]
Advertisement
Table of Contents
