Table of Contents
Advertisement
Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
When all screws have been applied and fixed, place
the screen module on the guide pins on the front of
the dark box. Be careful to ensure that the edges of
the screens are not damaged.
Screw on the screen module with an hexagon key
size 5 mm (torque 1-2 NM).
The picture on the right shows tightening one of the
screws at the bottom.
Try to fix the screen centered to the darkbox (visual
check)
Tighten all 4 screws!
Completely remove the two horizontal movement
screws.
________________________________________________
________________________________
________________________________
5. Installation
Step3
________________ 36
________________
________________
Advertisement
Table of Contents
