Barco OV-508 Installation Manual page 21

Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
Per column, 4 times PU II 3 is used to connect the left
to the right side of the pedestal.
Please note:
One of these PU II 3 profiles has 3 additaional counter
nuts. This profile has to be installed as front top
profile! Do not use it for the bottom connection!
is recommended to put the side wall onto the floor.
It
Start with installing 2 times PU II 3 to one of the side
walls.
Make sure that the profiles are attached exactly!
Install the other side wall to the horizontal bottom
profiles.
Instoll the left and the right bottom plates.
The bottome plates must be fixed by securing screws
(indicated by squares) and joined by rivets
(indicated by circles).
________________________________________________
________________________________ ________________________________
5. Installation
Step 04
Step 05
Step 06
________________ 16
________________ ________________