Table of Contents
Advertisement
The following pictures show a sketch of the installed wall fixation on the display wall:
Item no.
quantities
1
2
6
2
5
1
2
4
12
4
4
1
7
2
8
2
To install the wall fixation at the display wall, proceed as follows:
•
Take the fixation bracket [5] and attach it to the profiles of the dark box (linear setup!!) using the screws
M6x40 [12] and the washers U-6-125 [2] (4 screws). In case of a curved setup, the center of the bracket is
fixed to the polygonal connection bracket with 2 screws.
•
Position the profiles [1] and apply the bushings [4] (either on top of the profiles as shown in the drawing, or
beneath the profiles).
•
Insert the screws M10 [6].
•
Use the washers [8] and nuts [7] to fix it.
Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
Description
Profile (length: project specific)
Screw M10x110
Fixation bracket display wall side
Washer U-6-125
Screw M6x40
Distance bushing
Nut M10
Washer U-10-125
________________________________________________
________________________________
________________________________
7. Wall attachment
________________ 65
________________
________________
Advertisement
Table of Contents
