•
English
•
Français
•
Deutsch
•
Español
•
Italiano
To select the language
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Language submenu.
4. Select one of the available languages and confirm.
5.4.3
Source shortkey (Main source selection)
About the source shortkey
By default, the Source shortkey ( ) allows to scroll through all the possible input sources and quickly
select the main source, without the need to navigate through the OSD menu. This shortkey function can
be disabled however to avoid unwanted or accidental switching of the main input source.
To enable/disable the source shortkey
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Source shortkey submenu.
4. Enable/Disable the main source shortkey as desired and confirm.
5.4.4
OSD setting
5.4.4.1
OSD Horizontal Position
To adjust the OSD horizontal position
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the OSD setting submenu.
4. Select OSD Hor. Pos.
The command bar OSD Hor. Pos. is highlighted.
5. Set the OSD horizontal position as desired and confirm.
5.4.4.2
OSD Vertical Position
To adjust the OSD vertical position
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the OSD setting submenu.
4. Select OSD Ver. Pos.
The command bar OSD Ver. Pos. is highlighted.
5. Set the OSD vertical position as desired and confirm.
K5902133 (451920612482) MDSC-8255 23/11/2017
5. Advanced operation
29