Table of Contents
Advertisement
Take care that the screens are locked according their position!
Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
Installation of the screens for all other rows are
identical to installing the screens of the second row:
The screen above the static screen has to be locked in
horizontal direction, all other screens must not be
locked.
When all screens are mounted, put all horizontal
movement screws into the plastic bag (24 screws per
bag) and fix these plastic bags in the darkbox of the
static screen using the cable ties! In case the screens
have to be de-installed, these screws need to be
applied again!
Now the brushes have to be mounted.
The brushes serve as a light shield and close the gap
between the screen module and the darkbox. They
have to be glued on all edges of the display wall..
They are flexible to allow the movement of the
screens.
The brushes are available in two lengths, one
matching the horizontal, the other matching the
vertical dimension of the screen module.
First clean the surface where the brushes have to be
fixed with alcohol to remove any grease!
Start with the vertical brush on the bottom row!
Remove the protective tape.
________________________________________________
________________________________
________________________________
5. Installation
Step13
Step14
Step15
Step16
________________ 40
________________
________________
Advertisement
Table of Contents
