Table of Contents
Advertisement
5.12 Precabling
Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
Now it is recommended to start with the cabling.
Guiding the cables is easier without the core
elements (illumination unit, projection unit) installed.
The schematic at the left shows the layout of the
cabling. Guide the cables accordingly.
At the bottom of a column, all cables are fixed to the
cable hub and guided to the right.
Position the cables.
Fix the cables only loosely – finalizing the cabling and
fixing will be done after the installation of the
illumination unit and the projection unit, see Step 53.
________________________________________________
________________________________
________________________________
5. Installation
Step 42
Step 43
________________ 42
________________
________________
Advertisement
Table of Contents
