Connecting The Pedestals - Barco OV-508 Installation Manual

5.4 Connecting the pedestals

Barco - OV-508/OV-513/OV-515– R5990099 – installation manual – revision 01– November 2007 ________________________________
Proceed accordingly with the pedestals of all
columns.
When the pedestals of all columns are setup,
connect them!
For linear setup, connection is done via 2 screws on
the front side and one screw at the rear side.
The screws are of type M6x55 and fixed via nuts and
washers.
Make sure that adjacent profiles are exactly adjusted
(check area). If required, adjust the feet to meet the
same position.
________________________________________________
________________________________ ________________________________
5. Installation
Step 20
Step 21
________________ 22
________________ ________________