Programming Channels; Creating A Channel - Codan NGT 2010 RF Technical & Service Manual

NGT—Channel additions

Programming channels

Creating a channel

This section covers creating a channel in a transceiver in which receive and transmit
frequencies can be entered.
NOTE
To create a channel:
1
1
1
1
134
If you are operating the transceiver in a country that has stringent
licensing regulations, you may not be permitted to create channels with
transmit frequencies.
If the TxD option has been installed in the transceiver there are
restrictions on the frequencies you can enter. Use
channel with the TxD
If the TxP option has been installed in the transceiver you cannot create
channels.
Press until Main Menu is displayed.
Select Channel.
The currently selected channel is displayed. For example:
NOTE If the Channel List is empty, Free Tune is displayed.
Hold to open the List Manager.
Select Create entry.
The transceiver suggests a name for the new channel based on the name of the
channel you were on.
If the Channel List is empty a name is not displayed. Enter a name for
NOTE
the channel.
option.
NGT Transceiver System Technical Service Manual
page 137, Creating a