Codan NGT 2010 RF Technical & Service Manual page 177

1
1
NGT Transceiver System Technical Service Manual
Name of How to edit the setting
setting
Receive Freq Do one of the following:
•
•
When the frequency is correct, press
Transmit Freq Do one of the following:
•
•
•
When the frequency is correct (or erased), press
Mode Do one of the following:
•
•
•
The List Manager remains open. If you want to return to the
setting, close the List Manager by pressing
When you have edited the settings, press
Press until Main Menu is displayed.
To erase the frequency displayed, start typing. Enter the new
frequency in kilohertz.
To place the cursor at the end of the line so you can
backspace over the text and/or enter new text, press
the new frequency in kilohertz.
To erase the frequency displayed, start typing. Enter the new
frequency in kilohertz.
To place the cursor at the end of the line so you can
backspace over the text and/or enter new text, press
the new frequency in kilohertz.
To disable transmission on this channel, erase the transmit
frequency by pressing
To add a mode, press
hold to open the List Manager.
Select Add item, then select the mode you want to add to
the channel.
To edit a mode, scroll to the mode you want to edit, then
hold .
Select the mode you want.
To delete a mode, scroll to the mode you want to delete, then
hold to open the List Manager.
Select Delete item, then press
to delete the item.
As each channel must have at least one mode you cannot
delete the last mode from a channel.
until you return to the channel screen.
NGT—Channel additions
.
repeatedly.
.
to display the first mode, then
to confirm that you want
.
. Enter
. Enter
143