1
1
1
NGT Transceiver System Technical Service Manual
Do one of the following:
•
To use the name displayed, press
•
To enter a new name, start typing. When you have entered the name, press
•
To edit the name displayed, press
so you can backspace over characters and/or enter new text. When the name is
correct, press
.
To enter lower-case or numeric characters, press the # key until a
lower-case a or the hash symbol # is displayed at the bottom right of
NOTE
the screen.
The name must be unique to the Channel List.
The Receive Freq setting is displayed with the receive frequency of the channel you
were on.
Do one of the following:
•
to use this frequency, press
•
to enter a new receive frequency, type the frequency in kilohertz, then press
The Transmit Freq setting is displayed with the receive frequency you entered.
Do one of the following:
•
to use this frequency, press
•
to enter a new transmit frequency, type the frequency in kilohertz, then press
•
to disable the transmit frequency, erase the frequency by pressing
then press
to save the empty setting
The Mode setting is displayed.
.
. The cursor is placed at the end of the line
NGT—Channel additions
.
repeatedly,
135