High power—Overview and specifications
Overview
There are two solutions offered by Codan for power amplifiers used with NGT
transceiver systems and an antenna. These provide additional RF output power for a
fixed station. These solutions are:
•
•
The basic layouts of these systems are indicated below.
These amplifier systems can be enabled or disabled via the NGT handset.
Figure 1: Basic layout of a 3061/3062 high-power system
Figure 2: Basic layout of an HPAC module and an ALC adaptor module with
vendor equipment
208
the Codan 500 W Power Amplifier 3061 and 1 kW Power Amplifier 3062 systems,
and
the Datron TW500 and TW1000 power amplifiers, which require Codan's High-
power PA and Antenna Controller (HPAC) module and ALC adaptor module to
interface with the vendor equipment
NGT transceiver
system
Transceiver
supply
NGT transceiver
system
Transceiver
supply
TCVR
3061/3062
power amplifier
RF In
Power supply
High-power PA and
TCVR
ATU
antenna controller
Power Amp
TW500/TW1000
RF In
power amplifier and
power supply
NGT Transceiver System Technical Service Manual
ATU
Tuner
(optional)
RF Out
Tuner
(optional)
RF Out
ALC adaptor